Guide for Authors
The journal scope and acceptable article types can be found at Crop Breeding, Genetics and Genomics Aims and Scope. Please read Hapres Ethics and Policies before submitting your paper.
Crop Breeding, Genetics and Genomics is an open access journal, and all papers are published under the Creative Commons Attribution 4.0 International License (CC BY 4.0), with copyright retained by the authors. An Article Processing Charge is required to cover the journal cost.
Research Involving Plants
Experimental research on plants (either cultivated or wild), including collection of plant material, must comply with institutional, national, or international guidelines. We encourage authors to comply with Convention on Biological Diversity and the Convention on the Trade in Endangered Species of Wild Fauna and Flora.
We recommend authors refer to the reporting guidelines listed at EQUATOR Network when reporting health research, and check FAIRsharing Portal for prescriptive checklists for reporting biological and biomedical research, where applicable. If the manuscript contains statistical analysis, please refer to SAMPL guidelines. We will ask reviewers to check the statistical methods during peer review.
According to ICMJE Recommendations, authorship should be based on following criteria:
Acquisition of funding; general supervision of a research group or general administrative support; and writing assistance, technical editing, language editing, and proofreading alone, do not qualify for authorship. Those contributors should not be listed as authors but they should be acknowledged.
Authors’ contributions should be specified in the manuscript in “Author Contributions” Section. Changes to authorship cannot be made after a paper is accepted for publication.
Manuscripts must be written in English. For editors and reviewers to accurately assess the work presented in your manuscript, you need to ensure the English language is of sufficient quality to be understood. The Crop Breeding, Genetics and Genomics Editorial Board, however, encourages submissions from investigators throughout the world.
Authors should use the Microsoft Word template to prepare manuscripts. To facilitate peer-review process, tables and figures should be included in the manuscript close to where they are cited the first time. High resolution figures can be uploaded to submission system as a backup. Manuscripts should be submitted in .doc or .docx format, and should not be locked or protected. Editable files are required for processing.
Authors are encouraged to provide a graphical abstract as a self-explanatory image to appear in the online Table of Contents. It should be a high quality image in JPEG format. The graphical abstract can be uploaded during submission or proofreading. It may be used in social media campaigns or other marketing activities related to the paper after it is published.
The title page should include:
The abstract should be an objective representation of the article. A structured abstract or one paragraph abstract are both acceptable. The word limit is 250 words. Do not include citations in the abstract. Authors can use following style for structured abstracts.
Background: Describe the context and purpose of the study.
Methods: Report briefly how the study was performed, main methods and statistical tests used.
Results: Summarize main outcomes of the study.
Conclusions: Indicate main conclusions and potential implications.
Trial Registration: For clinical trials only, add here the name of the trial registry, registration number and URL link.
Authors should provide 3 to 10 keywords specific to the article. Good and accurate keywords can increase online visibility of the paper.
The introduction should explain the background of the study, the questions it aims to address, and how important it is. A concise literature review of key publications should be included. Authors should write the introduction as understandable as possible, because readers might be outside of the research field. If there are controversies or disagreements in the field, please mention them so that readers can get an overall view on the topic. The introduction should conclude with a statement on the aim of the study, and its contribution to the field.
Materials and Methods
Materials and methods section should provide enough details so that others can replicate the study. Common procedures can be provided with a reference, but new protocols should be described in details. If the new protocol is complicated, authors can submit a separate Protocol type paper alongside the study, which will be peer-reviewed together.
Statistical methods used in the study should be clarified in this section. The description should allow a knowledgeable reader with access to original data to judge its appropriateness and verify the results.
Results section should describe findings from the study arranged in a logical sequence without bias or interpretation. This section may be divided into subsections and subsubsections.
Authors are encouraged to make all relevant data from the study (including raw data, software, code, models, algorithms, etc.) available to readers, either through supplementary materials for small datasets or publicly available registries for large datasets. Please include name of the registry and link to data in Data Availability section below.
All figures should be cited in the paper in a consecutive order as Figure 1, Figure 2, etc. All figures should be placed in the main text near to where they are cited the first time, with a resolution of 300 dpi or higher.
Tables should be numbered and cited in the main text in sequence using Arabic numerals (i.e., Table 1, Table 2, etc.). All tables should be placed in the main text near to where they are cited the first time.
Math equations should be editable. Do not provide them as images. Simple formulas should be presented in line with main text where possible. Variables should be in italics.
Units of Measurement
Units of measurement should be presented clearly and concisely using System International (SI) units. If other quantities are mentioned, give their equivalent in SI.
This section should explain the implication of the results and should place them into a broader context of the current literature. Discussion may contain subheadings to highlight important areas that are expanded on in the main text.
This section should clearly and concisely describe the main conclusions of the work and their significance. You may also highlight limitations of the study and future research directions.
Additional files and data can be uploaded as supplementary files during submission. Title of the supplementary files should be included in the “Supplementary Materials” section. References cited only in supplementary materials should be listed at the end of the References section in the manuscript. Supplementary materials will not be typeset after acceptance.
Data Availability Statement
CBGG requires authors to include in any articles that report results derived from research data to include a Data Availability Statement from October 2022. The provision of a Data Availability Statement will be verified as a condition of publication. Some examples are listed below:
All authors should meet the authorship criteria listed in International Committee of Medical Journal Editors (ICMJE) guidelines. Individual author’s contributions should be provided in the manuscript, for example: “AB, BC and CD designed the study. AB, DE and EF performed the xyz experiments. FG and GH made the simulations. BC, HJ, and CD analyzed the data. AB, BC and CD wrote the paper with input from all authors.” Acquisition of funding; general supervision of a research group or general administrative support; and writing assistance, technical editing, language editing, and proofreading alone, do not qualify for authorship. Those contributors should not be listed as authors but they should be acknowledged in Acknowledgments section.
Conflicts of Interest
Authors must declare any competing financial and non-financial interests in relation to the work in the “Conflicts of Interest” section. Competing interests can arise in relationship to an institution, organization, or another person. Examples of potential conflicts of interest include employment, consultancies, stock ownership, honoraria, paid expert testimony, patent applications/registrations, and grants or other funding. If there is no conflict of interest, authors should state: “The author(s) declare(s) that there is no conflict of interest.”
Editors and reviewers are also required to declare any competing interests and may be excluded from the peer review process if a competing interest exists.
Authors are required to declare funding sources that supported the research in “Funding” section. Please include name of the funders and relevant grant numbers. Please also state whether the funding sources were involved in study design, data collection and interpretation, manuscript preparation, or the decision to submit the work for publication.
Acknowledgments should be included at the end of the paper, before list of references. In this section you can acknowledge any support given by others which is not covered by the “Author Contributions” or “Funding” sections.
Authors are responsible for ensuring that each reference is accurate and complete. All references should be numbered consecutively in order of appearance in main text, figures, tables and supplementary materials. References cited only in the supplementary materials should be listed at the end of the “References” section in the manuscript. Citations of references in text should be identified using numbers in square brackets (e.g., “as discussed by xxx ”; “as discussed elsewhere [2,3]”). The digital object identifier (DOI) should be included for all references where available.
Crop Breeding, Genetics and Genomics uses “Vancouver” style, as outlined in the ICMJE sample references (https://www.nlm.nih.gov/bsd/uniform_requirements.html) with some variations on electronic materials. Journal abbreviations can be found at https://www.ncbi.nlm.nih.gov/nlmcatalog/journals.
The EndNote style file for Hapres journals can be downloaded here.
Books and book chapters:
Reports, dissertations, and patents:
Websites and personal communications:
Corresponding authors should submit their manuscripts on behalf of their co-authors via the Crop Breeding, Genetics and Genomics Online Submission System. For manuscripts with two or more corresponding authors, one of them should be selected as the submitting author and assume responsibility for all communications with the Journal. Nevertheless, all authors’ contact information should be provided during submission, and the journal may contact all authors for important steps during peer-review.
The Crop Breeding, Genetics and Genomics Online Submission System will guide you stepwise through the process of entering information concerning your manuscript and uploading files. A cover letter indicating significance of the manuscript, and how it can fill in the journal scope should be submitted together with the manuscript. Authors will receive notifications and editors’ correspondence through email. The submitting author can track status of the manuscript and upload revisions via the Crop Breeding, Genetics and Genomics Online Submission System. If you encounter any problems during the online submission process, contact email@example.com for support.
Submission of manuscript implies that the work described has not been published previously, nor is under consideration for publication elsewhere. Manuscripts must be read and approved by all co-authors prior to submission. Please confirm the terms in cover letter. Crop Breeding, Genetics and Genomics uses the iThenticate software to detect instances of overlapping and text recycling in submitted manuscripts.
Crop Breeding, Genetics and Genomics applies single blind peer-review model, which means reviewers know the names of authors, but authors don’t know the identity of reviewers. All submissions will be initially assessed for compatibility with aims and scope of the journals. Manuscripts judged to be suitable will be sent to at least two independent expert reviewers to assess scientific quality. Please check “Editorial Workflow” for the whole peer-review process.
Submissions to Virtual Special Issues will undergo the same rigorous peer-review process as regular papers submitted to the journal. More information regarding Virtual Special Issues, please visit https://cbgg.hapres.com/SpecialIssues.aspx.
All manuscripts will undergo some editorial modification, so it is important to check proofs carefully, especially on authors’ names, affiliations, funder names and grant numbers. An email will be sent to the corresponding author to check proofs. Only minor corrections are allowed at this stage. Major changes may need to go through another round of peer review. To avoid delays in publication, proofs should be checked and returned within 48 hours.
Authors are encouraged to share their article with their colleagues or on social media after publication. A share button can be found on each paper’s html page. All papers can be accessed freely in the whole world. This will increase the visibility and impact of the research.
Corrections and Retractions
Crop Breeding, Genetics and Genomics publishes corrections, retractions, and expressions of concern as appropriate, and as quickly as possible. We follow the ICMJE and COPE guidelines where applicable.